DP600

The operating principle for all Hycontrol vibrating probe level switches is the same: a piezoelectric crystal is used to force a blade to oscillate at its fundamental frequency (also referred to as the natural resonance). When the blade of the probe comes into contact with the process media the natural frequency of oscillation is dampened; the electronics sense the change in frequency which causes the unit to switch.

The DP600 probe is the simplest vibrating unit from Hycontrol; it offers a basic, low-cost solution for a range of simple point switching applications. It has a single solid stainless steel rod which is vibrated by the piezoelectric element.

Thanks to its small size, it is ideal for use in small hoppers containing granular materials or pellets, such as plastics, food or grain. ATEX options are also available.

However, users must be aware that the circular construction of the DP600 means that it is not as sensitive to light materials. The DP600 probe should therefore only be used on products and materials which have a bulk density greater than 90 grammes per litre. If greater sensitivity is required, Hycontrol strongly recommends the DP120 vibrating probe.

DP600

If you are interested in this product or need our assistance please click here to send us a message and we will get back to you within 12 hours

Or give us a call on +44 (0)1527 406800 and speak to one of our team members

  • No moving parts to wear
  • No maintenance required
  • Very strong and robust
  • Unaffected by environmental changes
  • ATEX options
  • Simple to install
  • Measures products from 90 grammes/litre
  • Only sensitive near the probe tip 
Standard Length :
173 mm

Minimum Product Density :
90 gpl

Maximum Temperature :
-20ºC to +80ºC

ATEX Option :
Yes

DP Series Vibrating Level Switches for Solids - Datasheet
DP600, DP630 & DP650 Vibrating Probes for Solids - Manual v5

No Documents in this section

No Documents in this section