MD50 Cable

The MD50 is a cable-mounted admittance switch for top-mounted high-level applications.

Admittance probes utilise a very similar technology to capacitance to detect product level but feature an additional reference probe.

The probe changes output when the product comes into the vicinity of or makes contact with the sensor. This operating principle is reliant upon the dielectric properties of the media. The advantage of this technology is that it has the ability to work with a considerable build up on the probe without false switching as it can distinguish between a coating and product level.

The MD series probes are supplied with a pre-set material detection sensitivity, which suits most applications. Only when a sticky conductive material is to be detected may increased sensitivity be required. Unlike some competitive products, the transmitter does not require replacement with a more sensitive model should sensitivity adjustment be required. Both a range selection switch and potentiometer are provided, for maximum sensitivity adjustment flexibility. Their low maintenance requirements make them an ideal choice for many applications.

MD50 Cable

If you are interested in this product or need our assistance please click here to send us a message and we will get back to you within 12 hours

Or give us a call on +44 (0)1527 406800 and speak to one of our team members

  • Unaffected by material coating on the sensing probe
  • No moving parts to wear out
  • Easy installation through a 1” BSP process fitting
  • High corrosion and chemical resistance as standard options
  • Ideal for high-level detection
  • Low maintenance technology with no moving parts
  • Adjustable sensitivity for a wide range of products
  • Adjustable time delay to stop spurious signals from surface ripple
  • Interface level detection
  • High and low failsafe selection options
Standard Length :
5 m

Maximum Temperature :
150°C

Ground Level Test :
Yes

ATEX Option :
No

MD Series Admittance Probes - Data Sheet
MD Series Admittance Probes Setting Procedure - Manual v1

No Documents in this section

No Documents in this section