| TYPE
100 |
| 0PRECISION
AIR PRESSURE REGULATORS |
| 0Flow
Capacity SCFM (m3/hr)* |
014
(25) |
| 0Exhaust
Capacity SCFM (m3/hr)* |
02
(3.4) |
| 0Sensitivity
[inch/WC (mm)] |
00.125
(3.2) |
| 0Supply
Pressure Max [PSIG (kPa)] |
0150
(1050) |
| 0Approximate
Size (inches) |
02.0
x 2.06 x 4.26 |
| 0Approximate
Size (mm) |
052
x 52 x 108 |
| |
|
|
 |
| 0RANGE
PSIG (kPa) |
PORT
SIZE NPT |
MODEL |
| 02-40
(15-280) |
1/8 |
100-AA |
| 0 |
1/4 |
100-BA |
| 0 |
3/8 |
100-CA |
| 02-60
(15-420) |
1/8 |
100-AB |
| 0 |
1/4 |
100-BB |
| 0 |
3/8 |
100-CB |
| 02-120
(15-840) |
1/8 |
100-AC |
| 0 |
1/4 |
100-BC |
| 0 |
3/8 |
100-CC |
|
Multi-stage
regulator provides the highest level of regulation accuracy
and repeatability available. Output pressure is controlled
to within 0.1% of full range.
• Very
sensitive to changes in supply pressure and flow
• Able to hold set pressure
over long periods of time
•
High relief capacity, plunger operated, manifold mounted,
and low range models are available.
|
| TYPE
300 |
| 0INSTRUMENT
AIR FILTER REGULATOR |
| 0Flow
Capacity SCFM (m3/hr)* |
020
(33.6) |
| 0Exhaust
Capacity SCFM (m3/hr)* |
00.1
(0.17) |
| 0Sensitivity
[inch/WC (mm)] |
01.0
(25.0) |
| 0Supply
Pressure Max [PSIG (kPa)] |
0250
(1700) |
| 0Approximate
Size (inches) |
03.13
x 3.13 x 7.5 |
| 0Approximate
Size (mm) |
080
x 80 x 190 |
|
 |
| 0RANGE
PSIG (kPa) |
PORT
SIZE NPT |
MODEL |
| 00-10
(0-70) |
1/4 |
300-BD |
| 00-30
(0-210) |
1/4 |
300-BA |
| 00-60
(0-420) |
1/4 |
300-BB |
| 00-120
(0-840) |
1/4 |
300-BC |
| |
|
|
|
Designed
to provide clean, accurate air pressure to instruments,
valves, and other control equipment. Durable materials
of construction in
combination with an epoxy paint finish provide long lasting
corrosion resistance in harsh industrial environments.
•
Provides constant control of pressure under variable
flow rates and supply pressures
•
High capacity, long lasting depth filter
•
Epoxy finish is standard
•
Low droop
•
Through body mounting
|
| TYPE
400 |
| 0GENERAL
SERVICE PRESSURE REGULATOR |
| 0Flow
Capacity SCFM (m3/hr)* |
020
(33.6) |
| 0Exhaust
Capacity SCFM (m3/hr)* |
00.1
(0.17) |
| 0Sensitivity
[inch/WC (mm)] |
01.0
(25.0) |
| 0Supply
Pressure Max [PSIG (kPa)] |
0250
(1700) |
| 0Approximate
Size (inches) |
0DIA
2.5 H 5.63 |
| 0Approximate
Size (mm) |
0DIA
63 H 143 |
|
 |
| 0RANGE
PSIG (kPa) |
PORT
SIZE NPT |
MODEL |
| 00-10
(0-70) |
1/4 |
400-BD |
| 00-30
(0-210) |
1/4 |
400-BA |
| 00-60
(0-420) |
1/4 |
400-BB |
| 00-120
(0-840) |
1/4 |
400-BC |
| |
|
|
|
General
purpose regulator provides reliable performance under
variable operating conditions. This quality unit is ideal
as an economical alternative for control of industrial
process
applications.
• Aspirator
tube design helps
maintain
set pressure and minimise
“droop” at higher flow levels
•
Repeatable pressure output
•
Corrosion-resistant construction
•
Low cost makes this unit ideal for
high volume OEM applications
|
| TYPE
700 |
| 0PRECISION
HIGH FLOW PRESSURE REGULATOR |
| 0Flow
Capacity SCFM (m3/hr)* |
040-80
(68-140) |
| 0Exhaust
Capacity SCFM (m3/hr)* |
04
(7.0) |
| 0Sensitivity
[inch/WC (mm)] |
00.250
(6.4) |
| 0Supply
Pressure Max [PSIG (kPa)] |
0250
(1700) |
| 0Approximate
Size (inches) |
0DIA
3.0 H 6.0 |
| 0Approximate
Size (mm) |
0DIA
76 H 152 |
| |
|
|
 |
| 0RANGE
PSIG (kPa) |
PORT
SIZE NPT |
MODEL |
| 00-2
(0-14) |
1/4 |
700-BA |
| 0 |
3/8 |
700-CA |
| 0 |
1/2 |
700-DA |
| 00-15
(0-105) |
1/4 |
700-BC |
| 0 |
3/8 |
700-CC |
| 0 |
1/2 |
700-DC |
| 00-30
(0-210) |
1/4 |
700-BD |
| 0 |
3/8 |
700-CD |
| 0 |
1/2 |
700-DD |
| 00-60
(0-420) |
1/4 |
700-BE |
| 0 |
3/8 |
700-CE |
| 0 |
1/2 |
700-DE |
| 00-150
(0-1050) |
1/4 |
700-BF |
| 0 |
3/8 |
700-CF |
| 0 |
1/2 |
700-DF |
|
Ideal
for applications that require high
flow capacity and accurate pressure
control.
• Allows flow capacity up to 80 SCFM
• Dampering action of aspirator tube
provides stability under varying flow
conditions
• Sensitive to minute changes in down
stream pressure
|
| |
| TYPE
700BP |
| 0PRECISION
BACK PRESSURE REGULATOR |
| 0Flow
Capacity SCFM (m3/hr)* |
050 |
| 0Exhaust
Capacity SCFM (m3/hr)* |
0N/A |
| 0Sensitivity
[inch/WC (mm)] |
00.125 |
| 0Supply
Pressure Max [PSIG (kPa)] |
0250
(1700) |
| 0Approximate
Size (inches) |
0DIA
3.0 H 6.0 |
| 0Approximate
Size (mm) |
0DIA
76 H 152 |
| |
|
|
 |
| 0RANGE
PSIG (kPa) |
PORT
SIZE NPT |
MODEL |
| 00-2
(0-14) |
1/4 |
710-BA |
| 0 |
3/8 |
710-CA |
| 0 |
1/2 |
710-DA |
| 00-15
(0-105) |
1/4 |
710-BC |
| 0 |
3/8 |
710-CC |
| 0 |
1/2 |
710-DC |
| 00-30
(0-210) |
1/4 |
710-BD |
| 0 |
3/8 |
710-CD |
| 0 |
1/2 |
710-DD |
| 00-60
(0-420) |
1/4 |
710-BE |
| 0 |
3/8 |
710-CE |
| 0 |
1/2 |
710-DE |
| 00-150
(0-1050) |
1/4 |
710-BF |
| 0 |
3/8 |
710-CF |
| 0 |
1/2 |
710-DF |
|
Provides
sensitive protection against
over pressurisation in the downstream
portion of a pneumatic system.
Operates as a high precision relief
valve with an adjustable set-point.
• Provides
quick response to
controlled system pressure
variation
•
Flow capacity up to 50 SCFM
•
Compensating flow control from
venturi tube design
|
| TYPE
800 |
| 0SUBMINIATURE
PRECISION AIR PRESSURE 0REGULATOR |
| 0Flow
Capacity SCFM (m3/hr)* |
05
(8) |
| 0Exhaust
Capacity SCFM (m3/hr)* |
00.4
(0.68) |
| 0Supply
Pressure Max [PSIG (kPa)] |
0250
(1700) |
| 0Approximate
Size (inches) |
0DIA
3.0 H 6.0 |
| 0Approximate
Size (mm) |
0DIA
76 H 152 |
| |
|
|
 |
| 0RANGE
PSIG (kPa) |
PORT
SIZE NPT |
MODEL |
| 00-5
(0-35) |
800-AA |
800-BA |
| 00-15
(0-105) |
800-AB |
800-BB |
| 00-30
(0-210) |
800-AC |
800-BC |
| 00-60
(0-420) |
800-AD |
800-BD |
| 00-100
(0-700) |
800-AE |
800-BE |
|
Compact
unit that supplies precise air
pressure regulation for applications
where space is limited.
• Flow
capacity up to 5 SCFM
•
Stable output
•
Repeatable
•
Self relieving
•
Lightweight construction
|
| TYPE
850/860 |
| 0LOW
COST MINIATURE AIR/WATER PRESSURE 0REGULATOR |
| 0Flow
Capacity SCFM (m3/hr)* |
024
(48.2) |
| 0Exhaust
Capacity SCFM (m3/hr)* |
0.5
(.85) |
| 0Supply
Pressure Max [PSIG (kPa)] |
0250
(1700) |
| 0Approximate
Size (inches) |
01.5
x 1.63 x 2.80 |
| 0Approximate
Size (mm) |
038.1
x 38.1 x 71.1 |
| |
|
|
 |
| 0RANGE
PSIG (kPa) |
PORT
SIZE NPT |
AIR
MODEL |
WATER
MODEL |
| 00-15
(0-105) |
1/8 |
850-AA |
860-AAN |
| 0 |
1/4 |
850-BA |
860-BAN |
| 00-30
(0-210) |
1/8 |
850-AB |
860-ABN |
| 0 |
1/4 |
850-BB |
860-BBN |
| 00-60
(0-420) |
1/8 |
850-AC |
860-ACN |
| 0 |
1/4 |
850-BC |
860-BCN |
| 00-100
(0-700) |
1/8 |
850-AD |
860-ADN |
| 0 |
1/4 |
850-BD |
860-BDN |
|
Air/Water
regulator provides stable
output pressure in a small, economical
package.
•
Relieving and non-relieving
models
•
Non-rising adjustment knob with
locking capability
•
Lightweight construction
•
OEM friendly cost
|
| TYPE
900X |
| 0TRANSDUCER
(I/P,E/P) |
| 0Flow
Capacity SCFM (m3/hr)* |
04.5
(7.6) |
| 0Terminal
Based Linearity (% of span) |
0‡0-10 |
| 0Repeatability
(% of span) |
0<0.10 |
| 0Supply
Pressure Max [PSIG (kPa)] |
0100
(700) |
| 0Port
Size (Pneumatic) |
01/4
NPT |
| 0Port
Size (Electric) |
01/2
NPT |
| 0Approximate
Size (inches) |
01.50
x 1.50 x 3.69 |
| 0Approximate
Size (mm) |
038.1
x 38.1 x 71.1 |
| |
|
|
 |
| 0INPUT
SIGNAL |
OUTPUT
RANGE PSI (kPa) |
MODEL |
| 04-20
mA |
3-15
(20-100) |
900-ACA |
| 04-20
mA |
3-27
(20-185) |
900-ADA |
| 04-20
mA |
6-30
(40-200) |
900-AEA |
| 04-20
mA |
1-17
(7-117) |
900-AAF |
| 04-20
mA |
2-60
(15-420) |
900-AGA |
| 04-20
mA |
3-100
(20-700) |
900-AHA |
| 00-5
V |
3-15
(20-100) |
900-CCA |
| 00-5
V |
3-27
(20-185) |
900-CDA |
| 00-5
V |
3-27
(20-185) |
900-CEA |
| 00-10
V |
6-30
(40-200) |
900-ECA |
| 00-10
V |
1-17
(7-117) |
900-DEA |
| 00-10
V |
2-60
(15-420) |
900-EGA |
| 00-10
V |
3-100
(20-700) |
900-EHA |
|
Internal
feedback system provides
accurate conversion of a variable
electrical signal to a linearly
proportional pneumatic output.
•
Unit self-corrects to maintain
precise control of output pressure
•
Shock, vibration and position
insensitive
•
High accuracy
•
Non-interactive zero and span
•
NEMA-4X(IP65) Enclosure
•
Supply pressures up to 100psig
•
Built-in volume booster
•
Wall, panel, pipe, DIN rail
(optional) or manifold (optional)
mounting
•
Direct / reverse acting, full /
split range
|
| TYPE
500X |
| 0TRANSDUCER
(I/P,E/P) |
| 0Flow
Capacity SCFM (m3/hr)* |
04.5
(7.6) |
| 0Terminal
Based Linearity (% of span) |
0‡0-10 |
| 0Repeatability
(% of span) |
0<0.10 |
| 0Supply
Pressure Max [PSIG (kPa)] |
0100
(700) |
| 0Port
Size (Pneumatic) |
01/4
NPT |
| 0Port
Size (Electric) |
01/2
NPT |
| 0Approximate
Size (inches) |
02.18
x 2.18 x 4.24 |
| 0Approximate
Size (mm) |
055.4
x 55.4 x 107.7 |
| |
|
|
 |
| 0INPUT
SIGNAL |
OUTPUT
RANGE PSI (kPa) |
MODEL |
| 04-20
mA |
3-15
(20-100) |
500-AC |
| 04-20
mA |
3-27
(20-185) |
500-AD |
| 04-20
mA |
6-30
(40-200) |
500-AE |
| 04-20
mA |
1-17
(7-117) |
500-AF |
| 010-50
mA |
3-15
(20-100) |
500-BC |
| 010-50
mA |
3-27
(20-185) |
500-BD |
| 010-50
mA |
6-30
(40-200) |
500-BE |
| 00-5
V |
3-15
(20-100) |
500-CC |
| 00-5
V |
3-27
(20-185) |
500-CD |
| 00-5
V |
6-30
(40-200) |
500-CE |
| 01-9
V |
3-15
(20-100) |
500-DC |
| 01-9
V |
3-27
(40-185) |
500-DD |
| 01-9
V |
6-30
(40-200) |
500-DE |
|
This
electronic pressure regulator
converts a current or voltage input
signal to a linearly proportional
pneumatic output pressure.
•
Output pressure from 3-15 psig to
3-120 psig
•
NEMA-4X(IP65) Enclosure (optional)
•
Integral volume booster
•
Agency approvals
•
Field reversible
•
Easy span and zero adjustment
|
| TYPE
925
Provides
a common supply port for the Type 900X
I/P, E/P. Individual shut-offs allow in use service.
• One
supply line for multiple outlets
• Patented individual shut-off
valve
• DIN rail mountable
• Easy set-up
• Adaptable to provide common
output solenoid
valves
|
 |
| TYPE
950X |
| 0EXPLOSION
PROOF TRANSDUCER (I/P) |
| 0Flow
Capacity SCFM (m3/hr)* |
04.5
(7.6) |
| 0Terminal
Based Linearity (% of span) |
0‡0-10 |
| 0Repeatability
(% of span) |
0<0.10 |
| 0Supply
Pressure Max [PSIG (kPa)] |
0100
(700) |
| 0Port
Size (Pneumatic) |
01/4
NPT |
| 0Port
Size (Electric) |
01/2
NPT |
| 0Approximate
Size (inches) |
0DIA
3.50 H 4.60 |
| 0Approximate
Size (mm) |
0DIA
88.9 H 116.6 |
| |
|
|
 |
| 0INPUT
SIGNAL |
OUTPUT
RANGE PSI (kPa) |
MODEL |
| 04-20
mA |
3-15
(20-100) |
900XP-AC |
| 04-20
mA |
3-27
(20-185) |
900XP-AD |
| 04-20
mA |
6-30
(40-200) |
900XP-AE |
| 04-20
mA |
1-17
(7-117) |
900XP-AF |
| |
|
|
|
Compact
I/P transducer in an explosion-
proof housing delivers reliable
performance in hazardous areas.
Internal electronic feedback system
maintains accurate control of output
pressure.
¥ Explosion-proof
NEMA-4X(IP65)
enclosure
¥ RFI, EMI protected
¥ Shock, vibration and position
insensitive
¥ Field-selectable outputs (optional)
¥ Highly tolerant of impure air
¥ Easy wiring
|
| 0DIAPHRAGM
AIR CYLINDERS |
|
These
air cylinders utilise a rolling diaphragm to
provide a low-friction dynamic seal. This design
provides virtually frictionless conversion of fluid
pressure to linear force. •
Standard units are easily modified to meet
individual
customer requirements
•
Low hysteresis
•
No blow-by leakage
•
Available with linear ball bearings
•
Various mounting options |
|
 |
| The
Rolling Diaphragm Air Cylinder
The advent
of the long stroke rolling diaphragm as a means of low-friction
dynamic
sealing has led to the development of our Diaphragm
Air Cylinder. These cylinders
provide virtually frictionless conversion of pneumatic
pressure to linear force, and
offer such operating features as:
•
Super Sensitivity
•
Absolutely No Lubrication Required
•
Low Hysteresis
•
No Blow-By Leakage
•
Wide Temperature Variations
ControlAir
supplies each of these cylinders with quick delivery,
100% leak testing,
and full product support before and after the sale.
Aplications
The performance
advantages of our Diaphragm Air Cylinders make them
ideal for
applications such as Web Tensioners, Dancer Roll Tensioners,
Roll Loaders, Valve
Actuators, Accumulators, Positioners, and Impact Absorbers
to name a few.
Diaphragms
The
rolling diaphragm creates the perfect seal for friction
free cylinders. It is durable,
flexible membrane shaped like a top hat with the peak
of the hat fastened to the
end of the piston and the ÒbrimÓ clamped
to the cylinder cap. Inside of the cylinder
this forms a long-lasting frictionless seal between
the piston head and cylinder wall.
The fabric reinforced elastomer rolling diaphragms are
produced internally utilising a
microprocessor controlled process that is recognised
as the leading edge mode of
production. Custom diaphragm material design allows
for operation of the cylinders
at temperatures from -75¡F to 400¡F.M AIR
|
